everythingRf.com  
 
Find part numbers, datasheets or anything RF e.g. WiMax Amplifier or SKY65006
Advertise with Us
Click for NewsLetter Subscription
 
Follow everythingrf on Twitter

Online Advertising

 

Spec Search Engine

 
 
more categories coming soon!
 
 
 
 
 

Articles Index > Switches

Amplifiers
Antennas
Attenuators
Bluetooth
GPS
Inductors
LTE - Long Term Evolution
Matching
Phase Locked Loops (PLL)
Phase Shifters
Power Dividers
Receivers
RF Basics
RF Mixers
RF PCB Design
Smith Chart
Soldering
Switches
VCOs
WiMax
ZigBee
 
 
DatasheetLink   The Star of Switching is Often Overlooked
Walt Strickler from Giga-tronics Incorporated 2009
Switching is probably the most overlooked and undervalued part of a test system design. Great attention is spent selecting the measurement and stimulus instruments. But more often than not, the signal switching solution does not complement the instruments. It doesn’t matter how accurate the instruments are if the signals pass through a poor switch to get to them. Engineers are familiar with test instruments because they have used them during their school years and ..
 
 
Comment

 
 
DatasheetLink   2.45 GHz T/R, RF switch for Bluetooth applications using PIN diodes
Application note from Philips 2009
This application note addresses a transmit and receive switch for 2.4-2.5 GHz the unlicensed ISM band, in which the bluetooth standard operates. The design demonstrates a high performance T-R switch utilising low cost Philips BAP51-02 PIN Diodes as switching elements...
 
 
Comment

 
 
  The Design of Integrated Switches and Phase Shifters
By by Liam Devlin - Plextex Ltd. 2009
Great paper !!! Covers the main topologies for MMIC switch design such as SPDT switches with Series FETs,Series/Shunt SPDT, Terminated Switches, Reflective Switches and more.

..
 
 
Comment

 
 
  Matrix Switches
Brett Chermansky - Manager of Engineering, JFW Industries, Inc. 2009
In the RF&Wireless Industries, system performance requirements seem to expand almost daily. These systems continue to encompass more and more of today’s broad-reaching technologies. Engineers working in this environment are often tasked with designs that must combine and distribute RF signals from multiple input devices. While at the same time, making those signals available via multiple outputs. In many cases, an RF Matrix Switch can be the solution to this pr..
 
 
Comment

 
 
  The Design of a Low Loss, High Power, Microwave Switch MMIC
Plextek Ltd 2008
A Low Loss, High Power Microwave Switch with an operating Bandwidth of 7 – 11 GHz. The Switch has an insertion Loss of 0.71 dB and an Isolation of higher than 27 dB, with a power handling capability of 6.3 W

by Liam Devlin, Andy Dearn..
 
 
Comment

 
 
  A Monolithic, Dual Channel, DC - 20 GHz SPDT
Plextek Ltd 2008
This Paper discusses the designand evaluation of a SPDT switch designed to operate from DC – 20 GHz on Triquint’s 0.25um PHEMT process.

by S.Williamson, L.M. Devlin,G.A. Pearson and P.D.L.Beasly..
 
 
Comment

 
 
  Microwave Switches
Microwaves 101 2008
A lot of very useful information on Microwave Switches covering everything from the basics to more complex stuff...
 
 
Comment

 
 
  RF Fundamentals: Select PIN Diodes for microwave switch designs
www.planetanalog.com 2008
Selection criteria for PIN Diode Switches

By Joe Bukowski, M/A-COM..
 
 
Comment

1
« Page »
 
 
 

Featured Products

 
HMC849LP4CE: A Non-Reflective SPDT Switch from Hittite
More...

SS153DHS: SP5T Reflective 18 GHz PIN Diode Switch from Narda Microwave
More...

RF1146: A Broadband Low Power SP4T Switch from RFMD
More...

RF1156 - SP5T switch from RFMD operating from DC to 2.5 GHz
More...

The HMC-C071 - Non-Reflective SP4T Module Switch with High Isolation & Low Insertion Loss from DC to 20 GHz by Hittite
More...

 
 

 
 
| About Us | Contact Us | Sitemap | Feedback | Resources | Privacy Statement | Term of Service |
© 2008 Everything RF- All Rights Reserved.