Researchers Develop 3D Rolled-up RF Transformers for Smaller, More Efficient Wireless Circuits

A group of University of Illinois engineers are working on the idea of minimizing the size of transformer ICs present in wireless communication systems. Transformers use coiled wires to convert input signals to specific output signals for use in devices like microchips. Researchers in the past have developed some radio frequency transformers using a stacked conducting material to solve the space problem, but these have limited performance potential. This limited performance is due to inefficient magnetic coupling between coils when they have a high turns ratio, meaning that the primary coil is much longer than the secondary coil, or vice versa. These stacked transformers need to be made using special materials and are difficult to fabricate, bulky and unbendable – things that are far from ideal for internet of things devices.

The Illinois researches have come up with the concept of a Three-dimensional rolled-up radio frequency transformer that takes 10 to 100 times less space, performs better when the power transfer ratio increases and have a simpler fabrication process than their 2-D progenitors. They published details about their design and performance in the journal Nature Electronics.

According to Principal Investigator Xiuling Li, a professor of electrical and computer engineering, transformers are one of the largest and heaviest elements on any circuit board. The size of these transformers may become a key obstacle to overcome in the future for wireless communication and IoT.

The new transformer design uses techniques Li's group previously developed for making rolled inductors, making 3-D structures using 2-D processing. The team deposits carefully patterned metal wires onto stretched 2-D thin films. Once they release the tension, the 2-D films self-roll into tiny tubes, allowing the primary and secondary wires to coil and nest perfectly inside each other into a much smaller area for optimum magnetic induction and coupling.

The nested 3-D architecture leads to high turns ratio coils. A high turns ratio transformer can be used as an impedance transformer to improve the sensitivity of extremely low power receivers, which are expected to be a key enabler for IoT wireless front ends, according to another electrical and computer engineering professor and co-author Songbin Gong. Rolled transformers can also receive and process higher frequency signals than the larger devices.

Lead author and postdoctoral researcher Wen Huang, believes, wireless communication will be faster and use higher-frequency signals in the future. The current generation of radio frequency transformers simply cannot keep up with the miniaturization requirements and high-frequency operation of the future. Smaller transformers with more turns allow for better reception of faster, high-frequency wireless signals, as well as high-level integration in IoT applications.

The new transformers have a robust fabrication process – stable beyond standard foundry temperatures and compatible with industry-standard materials. This study used gold wire, but the team has successfully demonstrated the fabrication of their rolled devices using industry-standard copper. The next step will be to use thinner and more-conductive metal such as graphene, allowing these devices to be made even smaller and more flexible. This advancement may make it possible for the devices to be woven into the fabrics of high-tech wearables.

The U.S. Department of Energy Office of Basic Energy Science and the National Science Foundation supported the work.

Click here to read the paper published on this topic.