This slideshow lists the most viewed and downloaded RF & Microwave products on everything RF.
The 85312-11 from Skyworks is a 2.4 GHz front-end module (FEM) for WiFi applications with a Bluetooth port. This module has a transmit gain of 28 dB and a receive gain of 14 dB. It provides consists of a fully matched power amplifier (PA), power detector, harmonic filter, low-noise amplifier (LNA), SPDT switch, and a SP3T switch. This module is available in a compact, 16-pin QFN package which measures 2.3×2.3×0.33 mm. It has been developed for use in Wi-Fi enabled handsets, tablets, mobile systems and System-In-Package modules for embedded systems. Click here to see Products Specs
The PS-5G18G-400-A-SFF is a 5 to 18 GHz, Analog Phase Shifter with the capability for Phase Shifting from 0 to 400 Degrees. It has an Impedance of 50 Ohms, an insertion loss of 4 to 8 dB, VSWR of 2.3:1 and a phase voltage sensitivity of 40 Degrees. The phase shifter can accept a max RF power of 30 dBm CW and has a single positive control voltage from 0 to 10 V. It is available in a connectorized module with SMA Connectors. Click here to see Products Specs
The PE42525 is a SPDT RF switch die from Peregrine that operates from 9 kHz to 60 GHz. It is one of the 1st switches developed on their SOI process that operates up to 60 GHz. This high performance switch has a low insertion loss of 1.9 dB and Isolation of 38 dB with excellent linearity (IIP3 of 48 dBm) at 50 GHz. It can handle up to 27 dBm of CW power and 29 dBm of Pulsed power. This switch outperforms the best in-class GaAs solutions making it a great option for test and measurement, microwave backhaul, radars and military communication applications. Click here to see Products Specs
The RSA7100A wideband signal analysis solution from Tektronix provides 800 MHz of real-time bandwidth with up to 2 hours of streaming storage at full bandwidth in a single solution. It covers a broad frequency range from 16 kHz to 26.5 GHz for critical wide-bandwidth applications. The RSA7100A reduces the cost of wideband signal capture, record, and analysis while increasing the likelihood of capturing wideband signal transients. The instrument can trigger on and measure signals of just 700 ns duration in the frequency domain in real time while offering in-depth signal analysis with SignalVu-PC RF and vector analysis software. Together these capabilities provide a significant improvement over many other high-end signal analyzers on the market today.
The RSA7100A allows users to record up to 2 hours of streaming capture to internal RAID storage at the full 800 MHz bandwidth for such applications as environment recording and long event sequence analysis. Once the wideband signal data has been captured, the DataVu-PC software application makes it easy to quickly find and mark events of interest hiding within terabytes of stored data. DataVu-PC offers amplitude search and mark plus pulse measurements. Up to 2,000,000 pulses can be characterized for power, pulse-width, repetition interval and start-stop frequencies. Measurements can be exported in Pulse Descriptor Word format for use with other tools. Also, using DataVu-PC, smaller IQ files can be saved from within the longer captured file based on search and mark or manual selection. Click here to see Products Specs
The RFSP160TA0020G from RF-Lambda is a SP160T absorptive switch that operates from 0.5 to 20 GHz. It has a low insertion loss of 28 dB (considering it is a SP160T switch), high isolation of 60 dB and can handle up to 0.5 W of CW power. This switch has a VSWR of 1.5:1 and a switching speed of less than 70 ns. It is available in a hermetically sealed package with SMA female connectors. Custom designs for this switch are also available. Click here to see Products Specs
The ASG Series of Miniature Signal Generators from AtlanTecRF operate from 25 MHz to 6 GHz. They are tuneable in 1 kHz steps and can generate an output power of up to 13 dBm, controllable in 0.1 dB steps. The output signal from these modules have excellent spectral purity with a phase noise better than -106 dBc/Hz at 1 GHz with a 100 kHz offset from the carrier. Spurious are typically lower than -70dBc and harmonics less than -25dBc.
The versatile ASG digital interface provides control options which include direct USB with convenient and clearly functional GUI plus input power derivation but each unit also has the capability of being driven by RS232. Additionally, for both the 6GHz version of the ASG Miniature Signal Generator and its 3 GHz sibling there is an option of Ethernet control thereby allowing totally remote and unattended operation in the field and picking up all the logistics and cost advantages.
The ASG series of Miniature Signal Generators suitable for use in most RF application including test and measurement, communications systems and covert interception and countermeasures. The generators available in a compact module that measure just 21 x 72 x 100 mm and weigh less than 300 grams. Click here to see Products Specs
The HL9407 is a broadband balun that operates from 5 MHz to 67 GHz. This RoHS-compliant balun has 1.85 mm connectors, and is ideal for applications such as 40+ Gbps communications systems, modulator drivers, high-speed analog-to-digital converters, and single-ended to differential data conversion. It is bidirectional, so it can also be used as a high-performance signal combiner. Click here to see Products Specs
The 2185 high power amplifier system operates from 960 to 1215 MHz and provides up to 10 kW of pulsed power with duty cycles from 0.1% to 5%. This compact and versatile radar transmitting amplifier has flexible operating modes and is ideal for radar component testing, advanced research, and system development. It is also well suited for mobile EW and threat simulator applications. The amplifier sub-drawer boosters employed in this system features multiple high power LDMOS devices that provide wide frequency response, high gain, high peak power capability, and low distortions.
The amplifier system includes a built-in control and monitoring system, with protection functions that preserve maximum output availability. Remote management and diagnostics are via an embedded web server allowing network managed site status and control simply by connecting the unit’s Ethernet port to a LAN. Using a web browser and the unit’s IP address (IPV4) allows ease of access with the benefit of multilevel security. The control system core runs an embedded OS (Linux), has a built-in non-volatile memory for event recording, and factory setup recovery features. The extended memory option allows storage of control parameters and event logs. Click here to see Products Specs
The SENCITY OMNI-S MIMO from Huber+Suhner is a configurable multiband antenna for WiFi MIMO, Cellular/LTE and GNSS applications. This multiband antenna operates from 2.3 to 2.69 GHz, 3.4 to 3.8 GHz and 4.9 to 5.97 GHz delivering a gain of up to 6 dBi. It features four ports making it ideal for use as a 4x4 WiFi MIMO multi-port antenna. The antenna is designed for use in harsh environments i.e on street cabinets, distribution boxes, or industrial vehicles. The antenna measures 145 x 33 mm in size and comes with up to 5 m cable length. Its radome colour, sealing option, cable length and connector type can be selected at the time of installation. It has a single-hole mount design, which makes installation straight forward. Click here to see Products Specs
The SPECTRAN V5 Series from Aaronia is a range of real-time, hand held spectrum analyzers that operate 1 Hz to 20 GHz. These spectrum analyzers have a real-time bandwidth of 200 MHz and can analyse the weakest signals due to low noise signal processing down to -170dBN/Hz. They have real-time streaming, ultrafast LO sweeps, high-resolution TFT touch screen display with 800x480 pixel resolution, a tracking generator and GPS. The Spectran V5 can continuously stream data and save it gap-free on a PC via USB, and has polyphase filter technology that can capture small signal detail. They are available in a small, compact design and can be controlled either by touch screen, a multifunctional jog dial, motion control, hot keys or a real-time remote control (via GSM, WLAN or USB). Click here to see Products Specs
The PE2-45-8G12G-2R0-12-SFF from Planar Monolithics is a Low Noise Amplifier that operates from 8 to 12 GHz. It provides a gain of 45 dB with a flatness of 1.5 dB, P1dB of more than 20 dB and has a noise figure of under 2 dB. This amplifier requires a supply voltage of 12 to 15 V DC and draws 375 mA of current. It is available in a standard PE2 housing with SMA female connectors and is ideal for military and industrial applications. Other packages and connector types are also available. Click here to see Products Specs
The TC7718FTG from Toshiba is a wireless power transmitter IC with a 15W transmission capability. This IC is connected to a microcontroller, and realizes a wireless power transmitter system compliant with Qi, the standard defined by the Wireless Power Consortium (WPC). Toshiba's original cutting-edge CD-0.13 process realizes a small package and high efficiency, making system integration easy while securing a transmitter system with a small footprint. A 15W wireless transmitter created with the new IC will recharge devices quickly, at a rate equal to or shorter than wired chargers. The IC is suitable for use in wide range of applications including mobile devices, such as smartphones and tablets, and industrial devices. Click here to see Products Specs
The TGA2218-SM from Qorvo is a Ku-band, high power MMIC amplifier that operates from 13.4 to 16.5 GHz. It provides a saturated output power of 12 W with a gain of more than 23 dB and power added efficiency of 29%. This amplifier requires a supply voltage of 28 Volts and consumes 225 mA of current. It is available in a surface mount package that measures 5.50 x 4.50 x 1.67 mm and is ideal for radar and satellite communication systems. Click here to see Products Specs
The ERZ-HPA-0790-0840-37-E is a High Power Amplifier that operates from 7.9 GHz to 8.4 GHz. This X-Band amplifier provides an output power of 37 dBm and a gain of 36 dB. It requires a 34 V supply and draws 1125 mA of current. The amplifier is available in a module that measures 83.4x68.4x15 mm and has SMA female connectors. It is ideal for use in the lab, SATCOM, Telecom, Space and Aerospace applications. Click here to see Products Specs
MECA provides a range of N-Type fixed attenuators that operate from DC to 18 GHz. They are available in multiple attenuation configurations – 3 dB, 6 dB, 10 dB, 20 dB, 30 dB and 40 dB. These attenuators can handle an average power from 2 to 150 W and up to 1kW of peak power. They are available with N-type connectors and are RoHS compliant. Click here to see Products Specs
Copyright 2020 © everything RF All Rights Reseverd  |
Stay updated with the RF & Microwave Industry.
Content submitted here will be sent to our editorial team who will review and consider it for publication on the website. you will be emailed if this content is published on everything RF.
Please click on the button in the email to get access to this section.