Mobile and wireless backhaul solutions have been gaining momentum due to the high volume of data generated over the networks. 2020 saw the wide deployment of small cells and Wi-Fi devices by operators to utilize free spectrum and distribute network load. The adoption of higher bandwidth spectrum, due to the increasing use of smartphones, increased demand for mobile and wireless backhaul. To satisfy this need for higher bandwidth, various backhaul solutions were launched in 2020. everything RF has compiled a list of the Top 10 Mobile Backhaul Products that were most popular on the website in 2020.
Ultra-High Capacity, Microwave Backhaul Radio Link from 6 to 42 GHz
The WTM 4000 from Aviat Networks is a Microwave Backhaul Radio that operates from 6 to 42 GHz. It is optimized for all-outdoor applications and delivers ultra-high-capacity in single or dual-header architecture options. This backhaul radio provides a data rate of up to 2.5 Gbps and implements cutting-edge microwave networking features such as unique A2C. It has a channel bandwidth of up to 112 MHz and supports QPSK to 4096QAM Adaptive Modulation. The radio provides enhanced Ethernet Optimization using multi-Layer Header Compression (ML-HC), and line-of-sight MIMO.
This radio is available in single header (WTM 4100, with one transceiver) and dual-header (WTM 4200, with two transceivers) configurations, enabling capacities up to 5 Gbit/s per link. It has 4x user traffic ports, with electrical/PoE and optical interface options, including 1/2.5/10 GE. It offers advanced networking options and flexibility to address evolving backhaul and enterprise service needs, by combining the very latest in Carrier Ethernet switching. This model sets a new benchmark for 4G and 5G backhaul requirements.
WTM 4000 can also support split-mount operation connected to Aviat CTR 8000 microwave router, in a single, integrated network element. Click here for details.
5 GHz Backhaul Radio with Twist-On Antennas for Variable Gain
The C5x from Mimosa is an ultra-rugged 5 GHz radio operating from 4.9 to 6.4 GHz, available with four modular, twist-on antenna options. It is optimized for short to mid-range links with a native 8 dBi gain that can be increased to 12, 16, 20 or 25 dBi using Mimosa’s modular N5-X twist-on antennas. The custom-engineered N5-X Cassegrain or horn antennas are fabricated in rugged die-cast metal. They provide immunity from interference with breakthrough FTB and FTS performance, delivering 10 dB improvement in the Signal-to-Interference-Plus-Noise Ratio (SINR). This feature translates into a 10X performance increase against competitive integrated radios.
The C5x is designed for cost-effective point-to-multipoint (PTMP) deployments delivering up to 100BaseT of IP throughput out-of-the-box, and up to 500 Mbps when paired with a “C5x-PTMP” feature key upgrade (sold separately). A separate point-to-point (PTP) “C5x-PTP” feature key will upgrade the C5x to deliver up to 700 Mbps throughput for a PTP link. The C5x measures just 17.5 centimeters in height and weighs only 370 grams. It is ideal for public safety networks, smart cities & WiFi, broadband service provider, enterprise and campus connectivity applications. Click here for details.
70/80 GHz Ethernet/CPRI Radio with a Throughput of up to 3 Gbit/s
The UltraLink-FX80 / Ultralink-FX80 from Intracom Telecom Compact Node is an all-outdoor PtP Ethernet/CPRI radio that operates from 71-76 GHz and 81-86 GHz in the E-Band. It achieves a throughput of up to 3Gbit/s while offering a complete set of networking and packet synchronization features necessary for 4G/4G+ RAN backhaul. The radio has two electrical Gigabit Ethernet ports and an additional SFP Combo port, which can be used either as a GbE or CPRI traffic interface up to CPRI Option 3. The radio measuring 290 x 290 x 108 mm (320 x 247 x 104 mm for Compact Node) is designed to be easily mounted on poles and lamp posts. It is ideally suited for use in macro, micro, and small-cell backhaul and fronthaul applications requiring extended reach. Click here for details.
10 Gbps Full-Duplex 60 GHz Point to Point Backhaul Radio
The AireLink 60 10 Gig from LightPointe is a 60 GHz backhaul radio that delivers high-speed, low-latency, full-duplex wireless communications. It offers up to 10 Gbps of data throughput (20 Gbps total aggregated capacity) with channel bandwidth from 100 MHz to 2 GHz. This “Wireless Fiber” solution is an excellent backup/failover solution for wired networks and has a 38.5 dBi high gain antenna integrated into the design. This makes the system easy to install by businesses, video and security integrators, and 5G LTE telecom carriers. The transmission from one building or tower to another is precise and secure due to a narrow beam path of 1.9 degrees. The radio provides a range of up to 1.8 km (over 1 mile) consuming less than 35 watts of power. It operates in two modes: 2 x 1.25 Gbps Ethernet connectivity incorporating a fully integrated Ethernet switch (2.5 Gbps aggregate throughput), or 10 Gbps direct fibre-to-radio connectivity for maximum throughput and minimum latency. The backhaul is available in a compact enclosure that’s easy to deploy and utilizes the license-free V-Band spectrum. Click here for details.
E-Band Point-to-Point 10 Gbps Millimeter Wave Radio
The PTP850E from Cambium Networks is a Millimeter Wave Radio that operates from 71 to 76 GHz and 81 to 86 GHz in the E-band. This point-to-point outdoor backhaul solution supports 250. 500, 1000, and 2000 MHz channels BPSK to 512 QAM and delivers up to 10 Gbps Ethernet throughput in a 1+0 configuration. The PTP 850E can also be used in multi-band configuration with PTP 820C, PTP 820S, or third-party microwave radios to provide robust links of up to 10 Gbps. It transmits up to 18 dBm of power and has a receive sensitivity of -75.8 dBm. The radio features Adaptive Coding Modulation and Bandwidth (ACMB), ATPC, and Adaptive Bandwidth Notification (ABN). It is available with direct-mounted, antenna-mount and remote-mount options. Click here for details.
350 Mbps Point-to-Point Microwave Backhauls from 4.9 to 6 GHz
The 2000 Alpha Series from RADWIN are Microwave Backhauls that operate from 4.9 to 6 GHz. They deliver up to 350 Mbps of throughput. These backhauls have a range of up to 120 km/75 miles. They are available as an outdoor unit that measures 18.2 x 18.2 6 cm with an embedded antenna (16 dBi) and two SMA connectors to support external antennas. The radios are ideal for wireless enterprise access, video surveillance backhaul and building to building connectivity. Click here for details.
17 GHz / 24 GHz Point-to-Point Microwave Link
The RAy3 from Racom is a high-speed point-to-point microwave link that operates at 17 GHz / 24 GHz and provides up to 1 Gbps in challenging conditions. This Full Outdoor Software Defined Radio with Linux OS, is designed for high-performance links with maximum reliability, exceptional system gain, and resistance to disturbances. It supports 2048 QAM (1 Gbps) and 4096 QAM (540 Mbps) with channel bandwidths up to 112 MHz. This backhaul solution has been FCC and CE certified in the 24 GHz band and has CE certification in the 17 GHz Band. Click here for details.
4.5 to 42 GHz Licensed-band Microwave Backhaul System
The Orion Series from Trango Systems of licensed-band microwave systems operate from 4.5 to 42 GHz with channel bandwidth from 3.5 to 60 MHz. This Microwave Backhaul system provides a throughput of up to 761 Mbps in 1+0 FDX configuration and up to 1.5 Gbps in 2+0 FDX configuration. The Orion offers exceptionally high transmit power, modulation levels up to 1024QAM, physical layer ink aggregation, multi-layer header compression, and XPIC enabling full gigabit performance. It is available as in-door and out-door units and is ideal for mobile networks, security networks and private networks. The Orion Series are available in 3 options - All Outdoor i.e Zero Footprint, Requires No Rack Space, Split mount i.e Separate IDU (Modem) & ODU (Transceiver) and Indoor RF Unit (IRFU) Radio Transceiver is Housed in Standard 19 Rack Along with IDU (Modem) & dash Waveguide to Antenna Required. Click here for details.
5 GHz Gigabit Capable Backhaul Radio and Switch
The IBR-1300 from Fastback Networks is a fast and compact 5 GHz backhaul radio that meets all LTE requirements for throughput and latency in fully obstructed NLOS conditions. It has an integrated radio and switch. The dynamic spectrum analysis capability of the radio manages interference and ensures sustained radio link reliability and throughput. It has a throughput of 1.6 Gbps at 500 m range (NLOS) and 2 km range (LOS), 900 Mbps at 3 km range (LOS) and 300 Mbps at 13 km range (LOS). Full radio spectrum is available at all times to both transmit & receive channels for fast alignment & connections in more locations. The backhaul measuring 200 x 260 x 90 mm has an innovative antenna system that helps in auto-discovery and synchronization. Click here for details.
Terragraph Certified Point-to-Multipoint Backhaul Radio from 57 to 66 GHz
The Multihaul TG T265 from Siklu is a Point-to-Point/Multipoint Radio Backhaul that operates from 57 to 66 GHz. The radio backhaul has a throughput of up to 1000 Mbps. It supports TDD/TDMA duplexing techniques and has a range of up to 1000 ft/300 m. This Terragraph radio operates over the millimeter-wave spectrum using self-aligned and dynamic beam steering RF topology and supports multi-gigabit capacity in dense deployments. It can self-align horizontally (90 degrees) and vertically (50 degrees). The radio backhaul has an in-built software configured ethernet switch which has a PoE out up to 65 W for collocated CPEs, and video cameras. Click here for details.
Note: This list has been compiled based on actual analytics data from everything RF. It consists of the products that were most viewed by users on everything RF in a specific category in 2020 (not in any specific order). We have limited the number of products shown for each company to 1, even if there were multiple products from a single company.
