IMS 2026 (IEEE MTT-S International Microwave Symposium), the world’s largest gathering and industry exhibition for RF & Microwave professionals, will take place from 7 to 12 June 2026 in Boston, MA, USA. The aerospace and defense sector at IMS 2026 will highlight the important role of RF in enabling the next generation of mission-critical solutions.
Here is a list of some interesting Aerospace and Defense products from various manufacturers that will be featured at IMS 2026.
Dual-Channel mmWave Frequency Converter SiP from 18–40 GHz
This dual-channel mmWave frequency converter SiP provides integrated up/downconversion across 18–26 GHz and 26–40 GHz bands, extending existing EW systems without redesign. Available as a dual upconverter, dual downconverter, or transceiver, it doubles channel density while enabling drop-in frequency extension. Integrated power and optional hermetic packaging simplify deployment in compact high-performance systems.
Spectrum Control (Booth #20015)
4-Channel Switched Filter Bank from 18–40 GHz for SDR Applications
The PSB1030148 is a 4-channel switched filter bank that operates from 18 to 40 GHz for dynamic channel hopping in software-defined radios. Combining low-voltage RF switches with PolyStrata® band-pass filters, each channel provides over 6 GHz bandwidth with 1 GHz overlap, under 7.5 dB insertion loss, and up to 75 dB rejection. Featuring SMT bottom-side launches compatible with standard reflow or epoxy attachment, it delivers high performance in a compact micro-miniature PCB-mountable form.
Nuvotronics Booth #16090
Compact Phase-Coherent RF Up/Down Conversion Pair for Dense Multichannel Systems
The AM9057 downconverter and AM9058 upconverter form a stacked, miniature, phase-coherent RF conversion pair for dense multichannel systems. Their shared-LO architecture enables synchronized bidirectional operation, delivering high-performance, low-SWaP RF capability for EW, SIGINT, quantum, and advanced test platforms.
Mercury Systems Booth #15054
Agile RF Frequency Synthesizer from 1.25–20 GHz
The FSFS-120 is an agile RF frequency synthesizer that operates from 1.25 to 20 GHz with 1 kHz resolution. Designed for fast switching, it enables rapid frequency hopping with low phase noise. It supports parallel or RS-488 control and maintains stability with automatic internal reference switching, ideal for dynamic RF and microwave systems.
Ironwave Technologies Booth #23015
16-Tx/16-Rx X-Band Direct Sampling System Platform
The ADXBAND16EBZ is a complete system solution powered by four AD9084 mixed-signal front ends. It provides integrated RF, clocking, and power for advanced phased-array radar, wideband systems, and ground-based SATCOM applications. Designed for 16-Tx/16-Rx X-band direct sampling, it accelerates multi-chip synchronization, calibration, and beamforming development.
Analog Devices (Booth #23035)
E-Band GaN High Power Amplifier from 71–76 GHz
The APN386 is a 150 nm gallium nitride high-power amplifier that operates from 71 to 76 GHz for terrestrial and satellite backhaul applications. It delivers 36 dBm saturated output power with power-added efficiency exceeding 15% in a compact 4.2 x 3.6 mm form factor. The highly linear GaN technology supports advanced high-frequency communication systems.
Northrop Grumman (Booth #19030)
Digitally Tuned YIG Band-Reject Filter from 2–20 GHz
The TSA-226001 is a digitally tuned YIG band-reject filter that operates from 2 to 20 GHz. It provides 40–60 dB notch rejection, ~1.9 dB insertion loss, and fast tuning via 12/14/16-bit serial or parallel control with a P1dB of 10 dBm. This YIG filter is designed for MIL-STD environments.
Teledyne Microwave Solutions (Booth #19076)
Filters, Multiplexers, and Multifunction Assemblies up to 67 GHz
Reactel offers a full line of filters, multiplexers, and multifunction assemblies that operate up to 67 GHz and support military, commercial, 5G, industrial, and research applications. Available in compact, lightweight, or high-power configurations up to 25 kW, they can be designed as connectorized or surface-mount solutions tailored to specific application requirements.
Reactel (Booth #15018)
Ceramic RF Filters for Mission-Critical Applications up to 6 GHz
These high-performance ceramic RF filters provide a compact, lightweight, and cost-effective solution for radar and communication systems in harsh military, space, and aerospace environments. Available in Bandpass, notch, and diplexed configurations, they operate up to 6 GHz, with options for open-frame commercial or hermetically sealed military-grade packages.
Smiths Interconnect (Booth #17070)
Auto-tune Filters® for RF Interference Mitigation
AtFs® (Auto-tune Filters) are adaptive, passive, and compact RF components that automatically generate highly selective rejection notches centered at high power signals that exceed the AtFs’ predesigned limiting power threshold. Signals below this power threshold pass thru the AtF® with low loss. The AtF’s® notches will adjust in real time as above-threshold threats change in frequency, power, and bandwidth. Form factors include connectorized and surface mount.
METAMAG (Booth #24088)
Ultra-Compact Diplexer from DC to 18 GHz in 0.3" SMA Package
The DP2T18B diplexer reliably operates from DC to 18 GHz in a coin-sized SMA-connected form factor. The two contiguous bands cross at 2 GHz and offer high 60 dB rejection for excellent isolation, and insertion losses CH1 < 2.0 dB; CH2 < 1.5 dB. Ideal for drones, UAVs, and portable RF systems, it enables efficient wideband signal separation in space-constrained applications.
Plexsa Manufacturing (Booth #13096)
Low-Profile S-Band LC Bandpass Filter at 3.6 GHz
This low-profile LC bandpass filter is centered at 3600 MHz in an SMT package. It provides wideband performance with low insertion loss in a compact form factor, making it ideal for high-reliability radar, EW, and space applications in the S-band. Custom LC filter designs are available from 500 kHz to 14 GHz.
Networks International Corp. (Booth #21041)
17 kW S-Band GaN High Power RF Amplifier System
This compact GaN-based S-band high-power RF amplifier system operates from 2.7 to 3.1 GHz and delivers 17 kW peak output power. Designed for demanding RF applications, it is part of a broader solid-state high-power amplifier portfolio covering L-band through X-band, with custom solutions available up to 100 kW RF power.
Elite RF (Booth #16025)
High Power Compact S-Band Amplifier from 2.7–3.5 GHz
This S-band power amplifier operates from 2700 to 3500 MHz and delivers up to 250 W output power with high gain in a compact form factor. It is designed for pulsed RF applications, including radar, test equipment, and EW systems. The amplifier is housed in a rugged enclosure for easy system integration and reliable high-power performance.
CPC Amps (Booth #24023)
18 kW S-Band GaN Solid-State Radar Transmitter from 2.7–3.1 GHz
The RRT273118K-690 is an 18 kW S-band GaN solid-state transmitter operating from 2700 to 3100 MHz, designed for high-performance radar systems. Featuring a fault-redundant architecture with eight SSPA shelves, integrated power supply, air cooling, and control system, it ensures reliable operation and graceful degradation in mission-critical environments.
RFHIC (Booth #24054)
Three-Stage 70W GaN Power Amplifier from 7.9–11 GHz
The ICP1048P is a three-stage X-band MMIC power amplifier fabricated using GaN-on-SiC technology in a ceramic flange package. Operating from 7.9 to 11 GHz, it delivers up to 70 W output power with 35% PAE and 23 dB gain. It is designed for communication infrastructure, aerospace, and defense applications.
Microchip (Booth #19070)
Evaluation Board for Broadband SMT IQ Vector Modulator
The PIQ-1-SMT-EVAL is an evaluation board for the PIQ-1-SMT IQ vector modulator MMIC, featuring fully differential RF and LO ports with single-ended I and Q inputs. It integrates a broadband quadrature generator for multi-octave frequency coverage and operates from a single +4 V supply. The board includes four 2.92 mm connectors (LO+, LO−, RF+, RF−), two SMA connectors (I, Q), and header connections for power and ground.
Planar Monolithics (PMI) (Booth #20046)
23 W High Linearity Power Amplifier from 27–32 GHz
The TMC217 is a high-linearity power amplifier that operates from 27 to 32 GHz with a wide instantaneous video bandwidth for Ka-Band Satcom and military systems. It delivers 23 W linear output power at 19 dBc NPR, with IM3 near constant -33 dBc versus tone spacing. The amplifier operates with a nominal drain bias of 28 V at 3 A and is available as a bare die, die on tab, or in a package.
mmTron (Booth #22096)
High-Repeatability Electromechanical Switches from DC to 27 GHz
This High-Repeatability Series of electromechanical switches operates from DC to 27 GHz, offering low SWaP, high reliability, and excellent repeatability. Rated for a minimum of 10 million cycles and up to 15 million cycles, they are well-suited for automated test equipment and RF applications where long-term reliability and measurement consistency are critical.
MPG (Booth #16057)
High-Power RF Switches for Precision Microwave Systems
These high-power RF switches are designed for precision signal routing in microwave and RF architectures. They provide low insertion loss, high isolation, rapid switching, and stable power handling under demanding conditions. Optimized for aerospace, defense, and advanced test environments, these switches ensure repeatable performance and system integrity.
Corry Micronics (Booth #20046)
MIL-Standard RF Switches from DC to 40 GHz for Defense Applications
CEI’s MIL-standard RF switches are ultra-ruggedized for severe vibration and shock in airborne, naval, and ground defense environments. Available in thousands of configurations from DC to 40 GHz, including SPDT, DPDT, SP3T to SP12T, and internally or externally terminated models, they deliver strong repeatability and reliability for harsh-environment RF systems.
dB Control (Booth #21015)
Anti-Jam Multi-Constellation L1, L2, L5 Triple-Band GNSS Antenna
This new anti-jam antenna is ideal for mission-critical global positioning, navigation, and timing (PNT), including military unmanned systems & aerospace. Designed to mitigate interference and jamming signals from near ground-based sources, its excellent gain above 20° elevation angle enables it to be up to 10x closer to the source of interference (vs. standard helical antenna) with no jamming.
Pasternack (Booth #17082)
Integrated Drone Detection System with Long-Range RF Detection
The AARTOS™ Drone Detection System is an integrated airspace security solution for vehicles, buildings, and continuous outdoor operation. Using real-time drone protocol decoding and RF signal detection, it provides detection ranges up to 40 km for consumer UAVs and 80 km for military UAVs. Designed for standalone operation, it integrates seamlessly into existing security systems to detect and defend against potential drone threats.
Aaronia AG (Booth #23045)
Ultra-Wideband Rack Mount Digitizer with Six TxRx RF Channels
This rack-mount digitizer provides six wideband TxRx RF channels, each supporting up to 2500 MHz bandwidth on carriers up to 7 GHz. Featuring 8, 10, 12, and 14-bit sampling, dual 100 Gbit IP interfaces, scalable software upgrades, and planned DIFI channeliser capability, it is housed in a compact half-width 1RU design for commercial and MilSatCom ground station applications.
Filtronic (Booth #13018)
everything RF has published a magazine for IMS 2026 that lists over 150 products featured by companies at IMS 2026. A physical copy of the magazine will be available at the event in the Publication bins, at the everything RF Booth (24048) and at various company booths on the exhibition floor. In the meantime, you can download a digital version of the magazine below.
